Siemens Gigaset C1 User Manual Download Page 251

Page: 251 / 300

Using several handsets

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / several_handsets.fm / 08.06.2004

Deactivating the room monitor remotely

You can deactivate the room monitor remotely. Take the call from the room monitor and

press

O R

. The room monitor function will deactivate about 90 seconds after the

call ends. The room monitor will make no further calls. The other room monitor func-

tions on the handset (e. g. no ringer) will remain activated until you press

MENU

and

on the handset that is in the baby's room.

Setting the Walk and Talk mode

The Walk and Talk function allows two C1 handsets to communicate with each other no

matter how far they are from the base.

Example:

You go on holiday and take two handsets with Walk and Talk functionality

with you. Set the Walk and Talk function

on both handsets

. You can now communicate

using the handsets.

Precondition:

◆

Both handsets have been registered to the same base

◆

Both handsets are registered to different bases and both are set to

Best Base

(page 15)

◆

One of the handsets is not registered to any base and the registered handset is set

Best Base

◆

Neither handset is registered to a base.

on handset:

In Walk and Talk mode

◆

the maximum range between handsets is 300 metres outdoors,

◆

the handsets cannot be reached by incoming calls,

◆

handset operating times are severely curtailed.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands