Siemens Gigaset C1 User Manual Download Page 53

Page: 53 / 300

Using the directory and other lists

S1_SL1 / englisch / A31008-M373-B103-1-7619 / directories.fm / 08.06.2004

Changing the caller's phone number

Open the list of missed or accepted calls (page 50).

Now

Adding an entry to the directory from the calls list

Open the list of missed or accepted calls (page 50).

Now

Deleting an entry from the calls list

Open the list of missed or accepted calls (page 50).

Now

s v

Select entry and open the submenu.

Change number

Select the menu item and confirm. You will now see

the number.

Change the number.

Press the display key to open the submenu.

Save entry

Confirm.

s v

Select entry and open the submenu.

Copy to dir.

Select the menu item and confirm.

Scroll to the line

Name

and enter the name (for text

entry see page 155).
Press display key to open menu.

Save Entry

Confirm. The entry is stored.

Long

press (back to idle status).

either ...

Delete a single entry:

s v

Select entry and open the submenu.

Delete entry

Select the menu item and confirm. The entry is

deleted.

or ...

Delete all entries:

Open the submenu.

Delete list

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Confirm the prompt.

Long

press (back to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Siemens Gigaset C1, User Manual, Page: 53 / 300

Search results

Summary of Contents for Gigaset C1

Reviews: