Siemens Gigaset C1 User Manual Download Page 65

Page: 65 / 300

SMS (text messages)

S1_SL1 / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Opening the incoming message list

The

incoming message list

shows you:

◆

all received messages,

◆

messages that could not be sent despite several attempts. These messages are all

stored with an error status (page 70).

The message list is displayed for example as follows

Opening with the message key
Precondition:

There is at least one

new

message in the list.

Opening with the menu

A new text message is displayed, for example, as follows:

If the SMS memory is full and the SMS centre is unable to transfer any more, an appro-

priate message will appear on the screen. Press

to confirm and delete text messages

you no longer need from the incoming and outgoing message list (see also page 60 and

page 65). The SMS centre will then re-transmit the text message.

Inbox 2/ 5

Number of new text messages in the list
Number of old, read text messages in the list

Press the message key.
If there are no new calls/messages in the other lists,

then the first

new

text message is opened immedi-

ately. Otherwise:

Inbox 2/ 5

If necessary, select and confirm. The incoming mes-

sage list is opened and the first

new

message is dis-

played.

Open the menu.

Confirm.

Inbox 2/ 5

Select the menu item and confirm.

Total number of new SMS

Number of the text

message displayed

New

01/02

1234567890
12.07.03

09:45

y x

X Í

Text message status:

New, Old, Error

Phone number of the sender

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands