Siemens Gigaset C1 User Manual Download Page 76

Page: 76 / 300

Making cost-effective calls

S1_SL1 / englisch / A31008-M373-B103-1-7619 / charges.fm / 08.06.2004

Displaying and deleting the cost overview

Depending on the setting, call or charge units for each internal party, for each set-up

MSN, and for the entire system are displayed:

Activating/deactivating the charges of the last call

You can display the total charges and the charges of the last call for this handset on the

handset.
By factory default,

Last charge

is deactivated.

After activating the function, the call charges are displayed on the handset when you

press the talk key

. If the connection was not successful, the charges are displayed

after ending the call.

Open the menu.

s ë

Select the menu item and confirm.

Cost overview

Confirm. The total amount for all internal parties is

displayed.

Scroll to the accounts of the individual internal par-

ties or set-up MSNs.

If necessary, delete the amount from the cost

overview:

Press the display key to open the submenu.

Delete amount

Select the menu item and confirm.

Total and individual charges must be deleted separately. I.e., if you delete

the amount of an MSN, the individual charges of the handsets are

retained, and must be deleted separately.

Open the menu.

s ë

Select the menu item and confirm.

Last charge

Select the menu item and confirm (

‰

= activated).

Press end call key.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands