Siemens Gigaset C1 User Manual Download Page 16

Page: 16 / 300

Preparing to use the handset

S1_SL1 / englisch / A31008-M373-B103-1-7619 / starting.fm / 08.06.2004

Example of how to assign an MSN:

You have applied for four MSN's, two for business use (MSN1, MSN2) and two for private

purposes (MSN3, MSN4). Four handsets are connected to a base. Two handsets (Int.11

and 12) and the answering machine AM 91 are intended for business use, and two

handsets (Int.13 and 14) and the answering machine AM 92 are intended for private

use.

The following applies to Comfort handsets S1, SL1:

Because internal 11 and internal 12 handsets are assigned two (receiving) MSNs each,

they can use the

MSN next call

performance feature (page 114). They can change to

(sending) MSN2 during each outgoing external call. The internal 13 and 14 handsets

cannot do this.

Launching the Getting started wizard and setting the basic settings

Launching the Getting started wizard:

Internal users

Use

Receive MSN

Send MSN

Handsets

Int.11 , 12

Business

MSN1

MSN2

MSN1

Answering

machine

AM 91

MSN1

MSN2

---

Handset

Int.13

Private

MSN3

Handset

Int.14

MSN4

Answering

machine

AM 92

MSN3

MSN4

---

Open the menu.

s í

Select the menu item and confirm.

Installation

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to launch the Getting started

wizard.
If you already have set a system PIN (not 0000)

(page 91), you will be asked to enter it.

If required, enter the system PIN and confirm.

◆

The Getting started wizard cannot be used simultaneously by multiple

handsets.

◆

If there is already settings data (factory default or previous settings),

this data is shown at the appropriate positions in the display and can

be modified there.

◆

To cancel the Getting started wizard, press the end call key and hold.

All changes you have already saved using

Save entry

§§OK§§

are

retained. The handset returns to idle status.

◆

To skip a setting, press the display key

§§NO§§

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands