Siemens Gigaset C1 User Manual Download Page 92

Page: 92 / 300

Security settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / security.fm / 08.06.2004

Security settings

Changing the system PIN

You can protect the following settings against unauthorised access using the system PIN

(Personal Identification Number):

◆

Call charge settings (

)

◆

Internal and external call forwarding

(

/ Ext. call forw.

Int. call forw.

)

◆

SMS service centres, party configurations, security, ISDN, and system settings

(

Settings

)

◆

Getting started wizard (

Installation

)

The system PIN will not work with the number 0000.
When supplied, the system PIN is preconfigured to 0000.

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Providing you choose a number other than 0000:

Enter PIN and confirm.

Security

Confirm.

Change PIN

Select the menu item and confirm.

Enter new system PIN (up to 8 digits, 0 to 9) and con-

firm.

Repeat the new system PIN and confirm.

Long

press (back to idle status).

Memorise the new system PIN! If you forget it, the device will require

technical intervention. If this happens, contact the Siemens Hotline

(page 153).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands