Siemens Gigaset C1 User Manual Download Page 109

Page: 109 / 300

108

Individual handset settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_hs.fm / 08.06.2004

Sound Manager

You can use Sound Manager to record polyphonic melodies (max. length 4 sec.) or

record using a data cable (max. 16 kb) (page 158). A maximum of 16 melodies can be

stored.

Play the melody, edit the entry.

On the MT:

SL1

Open the menu.

s ê

Select the menu item and confirm.

Sound Manager

Select the menu item and confirm.

<New Sound>

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRR]

End

Press the display key or wait 4 seconds to end the

recording.
The recording is repeated automatically for you to

check.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Press the display key to save the recording.

Edit Entry

Enter name of the melody.

[RRRRRRRRRRRRRRRRRRRRR]

Save

Save name.

Long

press (back to idle status).

Open the menu.

s ê

Select the menu item and confirm.

Sound Manager

Select the menu item and confirm.

Select a melody.

either ...

Play the melody:

[RRRRRRRRRRRRRRRRRRRRR]

Play

Press the display key.

or ...

Changing an entry:

Press the display key.

Scroll to the

Volume

line to change the volume.

Scroll to the

Edit Entry

line to change the name.

Scroll to the

View Entry

line to display the file

names.

Scroll to the

Delete Entry

line to delete the entry.

... then

Long

press (back to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands