Siemens Gigaset C1 User Manual Download Page 40

Page: 40 / 300

Using the directory and other lists

S1_SL1 / englisch / A31008-M373-B103-1-7619 / directories.fm / 08.06.2004

Copying and changing a directory entry

So that you do not have to enter a similar entry twice, you can create a copy and then

edit that entry.

Open the directory.

s v

Select an entry and open the menu.

Copy and Edit

Select the menu item and confirm.

Change the phone number.

s ~

Scroll to the next line and change the name.

either ...

Save the changes:

Press display key to open menu.

Store

Confirm. The entry is stored.

or ...

Before saving, change the anniversary:

R[RRRRRRRRRRRRRRRRRRRR]

Edit

Jump to the line

Annivers.:

and press the display

key.

Change the anniversary (page 42) and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Press the display key to save the entry.

... then

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Yes

If you do not change the phone number, you will see

a message telling you that the phone number

already exists. Press the display key to confirm the

prompt.

Press key (return to idle status).

Voice pattern and VIP settings are not copied.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands