Siemens Gigaset C1 User Manual Download Page 80

Page: 80 / 300

Operating more than one handset

S1_SL1 / englisch / A31008-M373-B103-1-7619 / several_handsets.fm / 08.06.2004

Deactivating the room monitor

Press the OFF display key on the room monitor handset to deactivate the room monitor

function.

Setting the Walk and Talk mode

The Walk and Talk function allows two handsets to communicate with each other no

matter how far they are from the base.

Example:

You go on holiday and take two handsets with Walk and Talk functionality

with you. Set the Walk and Talk function

on both handsets

. You can now communicate

using the handsets.

Precondition:

◆

Both handsets have been registered to the same base

◆

Both handsets are registered to different bases and both are set to

Best Base

(page 21)

◆

One of the handsets is not registered to any base and the registered handset is set

Best Base

◆

Neither handset is registered to a base.

To reactivate the room monitor function with the same telephone

number, you must turn on the activation again and save with

Save

In Walk and Talk mode

◆

The maximum range between handsets is 300 metres outdoors,

◆

The handsets cannot be reached by incoming calls.

◆

Handset operating times are severely curtailed.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands