Siemens Gigaset C1 User Manual Download Page 193

Page: 193 / 300

Registering/de-registering handsets

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / registering_hs.fm / 08.06.2004

Registering/de-registering handsets

On some bases, your Gigaset C1 or C2 handset is registered automatically. In any event,

you can register your Gigaset C1 or C2 handset manually.
Your C2 Gigaset handset can be registered on up to four bases.

Automatic registration

To register for the first time, place the

deactivated

handset in the base with the

display

facing upwards

. The registration procedure takes about 1 minute. The handset

auto-

matically

receives the lowest free internal number from the range

Int.11

Int.16

If all the internal numbers for wireless terminals have already been assigned on your

phone, please de-register another handset that you no longer require before registering

a new one (page 15).

Manual registration

If all the internal numbers for wireless terminals have already been assigned on your

phone, please de-register another handset that you no longer require before registering

a new one (page 15).
You must initiate handset registration on the handset and on the base.

1. Preparing the base for registration (see operating instructions for the base).
2. On the handset (within 30 sec.)

After registration the handset reverts to idle status.

at the base:

CX100isdn

CX150isdn

SX100isdn

SX150isdn

MENU

Open the menu.

Handset Settings

Select the menu item and confirm.

Register Handset

Select the menu item and confirm.

Base 1

Select base (1–4) and confirm, e. g.

Base 1

Enter system PIN of the base (set at the factory:

0000) and confirm.

Registering

appears in the dis-

play along with the name of the base

e. g.

Base 1

Once the handset has located the base, the list of

free internal numbers is shown in the display.

Int.11

Select internal number and confirm, e. g.

Int.11

The handset interrupts the base search after 60 seconds. If registration

has not been completed within this time, repeat the procedure.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands