Siemens Gigaset C1 User Manual Download Page 194

Page: 194 / 300

Registering/de-registering handsets

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / registering_hs.fm / 08.06.2004

De-registering handsets

You can de-register any registered handset from any registered Gigaset C1 or C2

handset.

Changing the base

The following settings may be made if your handset is registered with more than one

base:

◆

Set to one specific base, e.g. the base at home or the base at the office.

◆

Set to the base with the best reception (

Best Base

). This setting will automatically

select whichever base has the best reception.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Handset Settings

Select the menu item and confirm.

Enter system PIN if required (page 78).

Setup user

Select the menu item and confirm.

De-reg. device

Select the menu item and confirm.

Int.16

Select the handset that you wish to de-register and

confirm, e. g.

Int.16

Hold down (return to idle status).

on handset:

MENU

Press display key to open menu.

Handset Settings

Select the menu item and confirm.

Select Base

Select the menu item and confirm.

Select one of the registered bases or

Best Base

and

confirm.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands