Siemens Gigaset C1 User Manual Download Page 25

Page: 25 / 300

Making calls

S1_SL1 / englisch / A31008-M373-B103-1-7619 / telephony.fm / 08.06.2004

Displaying caller's phone number

Precondition:

Calling Line Identification is activated for the caller.

Screen display with CLIP

With Calling Line Identification, the caller's telephone number is displayed on the hand-

set screen. If you have stored an entry for this number in your directory, then that entry

will be displayed instead of the number, e.g. "Anna".

Unavailable

is displayed on the screen if the caller's phone number is not identified.

Withholding phone number identification

If you do not wish your phone number to be revealed to the person you are speaking to

You can withhold identification of your phone number specifically for the next call or

else for all calls. If set for all calls, the phone number is withheld from the other caller

both for outgoing calls (CLIR) and for incoming calls (COLR).

Withholding transfer of the phone number only for the next call:

Withholding or permitting identification of your phone number for all calls:

By factory default,

Withhold no.

is not activated.

Telephone number or 'Anna'

Ext. call from
0891234567
for private

REJECT

RNG OFF

Receive MSN that is being called

Open the menu.

s í

Select the menu item and confirm.

Call preparat.

Select the menu item and confirm.

Temp.withhold

Select the menu item and confirm (

‰

= activated).

Hold down (return to idle status).

After the call, the setting is reset again. Your phone number will be iden-

tified to your next caller. When you call the selected phone number from

the last number redial list again, this call is also not anonymous.

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

ISDN settings

Select the menu item and confirm.

Withhold no.

Select the menu item and confirm (

‰

= activated).

Hold down (return to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Siemens Gigaset C1, User Manual, Page: 25 / 300

Search results

Summary of Contents for Gigaset C1

Reviews: