Siemens Gigaset C1 User Manual Download Page 217

Page: 217 / 300

SMS (text messages)

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Entering, editing or deleting phone numbers for SMS centres

You can enter up to ten SMS centres.
Before entering or editing the number, please obtain information about special features

and what the SMS service provider offers.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Service centres

Select the menu item and confirm. The phone

number list appears.

Select entry, e. g.

<empty>

MENU

Open the submenu.

either ...

Create or edit an entry:

Edit entry

Confirm.

Enter the phone number of the SMS centre.

MENU

Press the display key to open the submenu.

Save entry

Confirm.

or ...

Delete an entry:

Delete entry

Select the menu item and confirm.

Hold down (return to idle status).

◆

If you delete the phone number of a send centre, then you must

activate another SMS centre to be the send centre in order to be able

to continue sending text messages.

◆

If your telephone is connected to a PABX, you may have to prefix the

phone number with an access code (number with which you obtain

an exchange line, usually "0") (this depends on your PABX) see

page 50.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Siemens Gigaset C1, User Manual, Page: 217 / 300

Search results

Summary of Contents for Gigaset C1

Reviews: