Siemens Gigaset C1 User Manual Download Page 246

Page: 246 / 300

Setting the answering machine

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / answeringm_config.fm / 08.06.2004

Activating/deactivating listen in

You can only activate the listen in function if a handset has been assigned to the answer-

ing machine.

Precondition:

You have selected an answering machine (page 53).

Activating/deactivating automatic pickup

With automatic pickup you can take a call directly from the answering machine

(announcement or recording is running) on any handset or by lifting a receiver (tele-

phone with cord) providing the same receive MSN is assigned to all devices. You just

need to press the talk key

on the handset. The recording of the call will then stop.

As supplied, automatic pickup is activated.

Precondition:

The same receive MSN is assigned to both the answering machine and

the handset/terminal.

Select HS

Select the menu item and confirm.

Select the handset and confirm,

e.g.

Int13: Anna

Settings

Select the menu item and confirm.

Aut. listen in

Select the menu item and confirm.

either ...

Activate listen in:

Activate?

Confirm.

or ...

Deactivate listen in:

Deactivate?

Confirm.

If automatic listen in is activated for a handset (page 66) then the call can

only be taken on this handset.

MENU

Open the menu.

Base Settings

Select the menu item and confirm.

Settings

Select the menu item and confirm.

System settings

Select the menu item and confirm.

AM auto. pickup

Select the menu item and confirm (

‰

= activated).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands