Siemens Gigaset C1 User Manual Download Page 142

Page: 142 / 300

141

Operating the answering machine directly

S1_SL1 / englisch / A31008-M373-B103-1-7619 / answeringm_use.fm / 08.06.2004

Two-way recording

You can make a two-way recording of a call. The two-way recording can then be played

back or deleted like a message.
During a call:

Picking up a call during answering machine operation

You can pick up a call, even if the answering machine has already switched itself on (the

icon flashes on the screen), or your announcement is still running, or the caller is

already leaving a message. When you pick up the call the recording stops.

Preconditions:

◆

To pick up an answering machine call, the minimum authorisation "Answer only" is

required (page 92).

◆

The same receive MSN is assigned to both the answering machine and the handset

picking up the call (page 81).

◆

Automatic listen in is not activated on any other handset (page 88).

In order to call another external party while the answering machine is recording a call

you must deactivate the automatic pickup (page 89).

Open the menu.

Record

Select the menu item and confirm.

AM1

Select an answering machine and confirm,

e.g.

AM1

. The two-way recording starts at once.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

STOP

Press the display key to end the two-way recording.

The two-way recording is also ended when the call ends or when the

memory is full. You should inform the person you are speaking to in

advance that you are making a two-way recording.

Automatic call pick up is activated (see page 89,

factory default):

c d

Press the talk or handsfree key. You pick up the call.

Automatic pickup is deactivated:

c d

Press the talk or handsfree key.

either ...

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

OP.LIST

Press the display key to screen the call.

The caller cannot hear you.

or ...

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

ACCEPT

Press the display key to pick up the call.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Siemens Gigaset C1, User Manual, Page: 142 / 300

Search results

Summary of Contents for Gigaset C1

Reviews: