Siemens Gigaset C1 User Manual Download Page 93

Page: 93 / 300

Security settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / security.fm / 08.06.2004

Defining authorisation

You can set different authorisations for all registered devices:

◆

Unrestricted

(set as factory default)

All devices can answer incoming calls and make external/internal outgoing calls.

◆

Incoming only

The devices can only answer incoming calls. External calls cannot be made. Internal

calls can be made. Emergency numbers can be dialled.

◆

Internal only

The devices can only make and answer internal calls. Emergency numbers can be

dialled.

Emergency numbers

By default, the country-specific emergency numbers are entered. These cannot be

edited or deleted. You may enter five emergency numbers of your own choice.

Setting up, editing, reading and deleting personal emergency numbers

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

If required, enter the PIN and confirm.

Security

Confirm.

Authorisation

Select the menu item and confirm.

Internal 11

Select the internal number, e.g.,

Internal 11

Press the display key to open the submenu.

Internal Only

Select authorisation, e.g.,

Internal Only

, and con-

firm. The set authorisation is marked with a

‰

Long

press (back to idle status).

The emergency number can also be dialled by a handset with restricted

authorisation (e.g.,

Internal only

Open the menu.

s í

Select the menu item and confirm.

Settings

Select the menu item and confirm.

If required, enter the PIN and confirm.

Security

Confirm.

Emergency nos.

Select. The emergency numbers list is opened.

<no entry>

Select list entry, e.g.,

<no entry>

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands