Siemens Gigaset C1 User Manual Download Page 215

Page: 215 / 300

SMS (text messages)

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

SMS (text messages)

You can send and receive SMS text messages (

hort

essage

ervice) with your hand-

set. You can send an SMS to any fixed network or mobile phone network number. Your

SMS can be received as a text message by any device with SMS functionality (mobile

phone, PC, another telephone). If the recipient of your SMS does not have a phone with

SMS functionality, then the SMS is played back.
You can write, edit, read, delete or forward SMS text messages from any registered

handset that has SMS functionality and to which the same receive MSN has been

assigned. When several handsets with the same receive MSN are in use at any one time,

only

one handset

can access the SMS functions.

General

Text messages are exchanged between SMS centres that are operated by service provid-

ers. The telephone number of the SMS centres through which you wish to send and

receive text messages must be entered in your phone (page 38). Up to ten SMS centres

can be entered. The

SMS Service Centre "Anny Way"

and the

provider's SMS service

are preconfigured

at the factory. You can change the telephone numbers of the SMS

centres.
You can receive text messages via

any

of the SMS centres whose number you have

entered. Of course you must be registered to receive text messages with those SMS cen-

tres (page 40).
Your text message is sent through the SMS centre that is entered as the

active

send

service centre.

Before you can send and receive text messages from SMS

◆

Calling Line Identification may not be permanently deactivated for the MSN used

(page 17).

◆

You must be registered with your service provider to receive text messages

(page 40).

◆

The handset must have

Unrestricted

authorisation to send an SMS. To receive an

SMS,

Incoming only

authorisation is adequate. This setting can only be made with

an S1, SL1 Komfort handset or on the SX303isdn, SX353isdn, CX203isdn,

CX253isdn base telephone

◆

You must not allow the network provider to block the phone numbers you have

entered for the SMS centres.

In Germany, the SMS service is available exclusively to telephone numbers that are con-

nected with the

local area network

via

Deutsche Telekom AG

(you receive your tele-

phone bill from Deutsche Telekom). It is currently not possible to send a text message if

you have a call-by-call connection.
If the telephone of a receiver cannot receive an SMS in the fixed network, the SMS is

automatically read as a voice message. Between 7.00 and 22.00 hrs, these text mes-

sages are delivered immediately in the form of a telephone call. Text messages sent

after 22.00 hrs are stored and delivered the next day.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands