Siemens Gigaset C1 User Manual Download Page 198

Page: 198 / 300

Making calls

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / telephony.fm / 08.06.2004

Handsfree

Activating/deactivating handsfree

As soon as you terminate the handsfree mode you switch to "earpiece mode" and con-

tinue the call on the handset.

Adjusting the volume while in handsfree mode

A call is in progress and handsfree is activated.

Callback when the number is busy (CCBS) / when the call is not

answered (CCNR)

Precondition:

The exchange supports this service.

Ringback when busy – CCBS (Completion of calls to busy subscriber)

The user you are calling is currently making a call. Automatic callback saves you making

repeated attempts to dial the number.

Callback when the call is not answered – CCNR (Completion of Calls No Reply)

If the user you are calling does not answer you can arrange automatic callback. As soon

as the user has finished a call and the line is free again you will be rung back. The call-

back request is automatically cancelled after about 2 hours (depending on the

exchange).

Activate while dialling:

~ d

Enter the phone number and press the handsfree

key (instead of the talk key

Activate during a call:

Press the handsfree key.

Deactivate handsfree:

Press the handsfree key.

If you wish to place the handset in the base during a call you must press

the handsfree key

and hold it down while you position the handset in

the base.

Press the handsfree key

again

u v

Decrease or increase the volume and confirm.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands