Siemens Gigaset C1 User Manual Download Page 11

Page: 11 / 300

Preparing to use the handset

S1_SL1 / englisch / A31008-M373-B103-1-7619 / starting.fm / 08.06.2004

Your handset is now ready for operation. To correctly record the time of calls and, if

applicable, messages you must now set the date and time. Depending on the network

provider, the date and time are updated automatically by the telephone network with

every outgoing call. All the settings necessary for operating the telephone can also be

set up easily with the Getting started wizard (page 14).

Attaching the belt clip

Push the belt clip onto the back of the handset until the lugs click into the recesses on

either side of the handset.

Activating/deactivating the handset

To activate the handset, press the end call key

and hold. You will hear a confirmation

tone (rising tone sequence).
To deactivate the handset, press the end call key

again in the idle status and

hold

(confirmation tone).

Activating/deactivating the keypad lock

You can lock the handset keypad if, for example, you are carrying the handset. This pro-

tects the keypad against inadvertent activation.
Press and

hold

the hash key

. You will hear a confirmation tone and the symbol

will appear in the display.
To

deactivate

◆

on S1, SL1, C1, C2:

Press the hash key

again and

hold

(confirmation tone).:

The deactivated handset activates automatically when placed in the base

or charger.

◆

The key lock switches itself off automatically if you receive a call. It re-

activates when the call is finished.

◆

When the keypad lock is active, you cannot even call emergency num-

bers.

◆

The keypad lock is still indicated if you have installed a logo as display

graphic (page 69).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands