Siemens Gigaset C1 User Manual Download Page 209

Page: 209 / 300

Using the directory and other lists

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / directories.fm / 08.06.2004

Adding a displayed telephone number to the directory

When a telephone number appears in the display (CLIP) you can add it to your directory.

You can do this while dialling from the last number redial list, from the calls list/answer-

ing machine list (on a Gigaset with answering machine) or during a call.

Selecting a phone number from the directory

If you are prompted to enter an external telephone number while you are operating

your telephone, you can use the directory to do this.

Precondition:

The input field for external telephone numbers is displayed.

The telephone number is added to the entry field.

Sending a single entry or complete list to a handset

You can send single entries or the complete list to another handset that is registered on

the same base. This avoids entering information twice. VIP settings and speed dial

(shortcut) digits are not sent.

MENU

Press display key to open menu.

Copy to Directory

Select the menu item and confirm.

Confirm the telephone number.

MENU

If required, enter the name and press the display key.

Save Entry

Confirm. The entry is stored.

Long

press (back to idle status).

h C

Open the directory or speed dial list.

... then

Select entry and confirm.

on handset:

h C

Open the directory or speed dial list.

MENU

Select the entry and press the display key.

either ...

Send a single entry:

Send Entry

Select the menu item and confirm.

or ...

Send complete list:

Send List

Select the menu item and confirm.

... then

INT 2

Select the handset to which you wish to send the

entry or list and confirm, e. g. handset 2. Your selec-

tions are sent to that handset.

Long

press (back to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands