Siemens Gigaset C1 User Manual Download Page 230

Page: 230 / 300

SMS (text messages)

C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004

Errors when receiving a text message

A message appears on the screen if your phone cannot receive any more text messages.
You

cannot

receive text messages under the following conditions:

◆

call forwarding has been activated with

Immediately

◆

the memory (incoming and outgoing message lists) is full.

Self-help with error messages

Error Message

Possible Cause

Remedy

You cannot send messages.

Calling Line Identification

(CLIP) has been withheld per-

manently.

Permit Calling Line Identifica-

tion (CLIP) again

(page 17)

Message transfer was inter-

rupted (e. g. by an incoming

call).

Re-send the message.

No number or an invalid

number is entered for the SMS

centre activated as the send

centre.

Enter phone number

(page 38).

You receive a message whose

text is incomplete.

Your phone's memory is full.

Delete some old messages

(page 48).

The message is played back.

Your terminal is stored in the

database of your SMS provider

as having no fixed network

SMS functionality, i. e. you are

no longer registered with the

provider.

for SMS reception.

For the "Anny Way" SMS service

centre: send a blank text mes-

sage to number 2547.

For Deutsche Telekom:

send a text message with the

message REGISTER to 8888.

Messages are only received

during the day.

If your SMS network provider's

database does not yet know

that your terminal supports

fixed network SMS functional-

ity, then it will only attempt to

deliver messages during the

day.

for SMS reception to get it re-

assigned in the database.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands