Siemens Gigaset C1 User Manual Download Page 17

Page: 17 / 300

Preparing to use the handset

S1_SL1 / englisch / A31008-M373-B103-1-7619 / starting.fm / 08.06.2004

Setting the date and time:

Depending on the network provider, the date and time are adopted automatically from

the telephone network during the first outgoing call.
The display shows:

Enter time?

If the time should be displayed in 12-hour mode, you can modify the setting later

(page 94).

Hiding/showing answering machine

The following answering machines AM1, AM2, and AM3 are available. You can use the

answering machine when it is shown. By factory default, only AM1 is shown (only AM1

is displayed in the menus).
The display shows:

Suppress display of AM1?

Respond with

◆

YES

, if you want to hide AM1,

◆

with

, if you want to use AM1.

This sequence will then be repeated for AM2 and AM3.

Finding your phone numbers (MSN):

This function must be supported by your network provider.
The display shows:

Find own numbers (MSN)?

Several phone numbers (MSN) were provided by the network provider when you

received your ISDN connection confirmation. You can store up to 10 phone numbers. If

an MSN has not been entered on your telephone, you can retrieve the phone numbers

from the telephone exchange.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

YES

Press the display key to set the date and time.

Enter the date (6-digit) and time (4-digit in 24-hour

mode) in series,

e.g. 200903 0945 for 9/29/03 9:45 a.m..
Press the display key to open the submenu.

Save entry

Select the menu item and confirm.

On the base:

SX150isdn

CX253isdn

SX255isdn

SX353isdn

An answering machine can only be hidden if there are no messages/

memos stored in it (page 82).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands