Siemens Gigaset C1 User Manual Download Page 95

Page: 95 / 300

Date and Time

S1_SL1 / englisch / A31008-M373-B103-1-7619 / time_calendar.fm / 08.06.2004

Date and Time

Setting the date and the time

The first time you make a call on your phone, the date and time are transmitted by the

exchange.
You can choose between the 12 hour and the 24 hour display (factory setting) for the

time (a.m. = 1st half of the day; p.m. = 2nd half of the day).

In 12-hour mode you can scroll to the

Time:

line and then use the display key

am/pm

switch between

and

Setting the alarm clock

You can use your handset as an alarm clock.

Precondition:

You have set the date and time.

Activating and setting the alarm clock

If you want to use your handset as an alarm clock, you have to set the alarm time,

choose a melody and activate the alarm clock.

Open the menu.

s ç

Select the menu item and confirm.

Date/Time

Select the menu item and confirm.

Enter the date:

In the

Date:

line, enter the day/month/year.

Enter the time:

s ~

Scroll to the

Time:

line and enter the hours/minutes

in a 4-digit format

Select display mode:

s r

Scroll to the

Time Mode:

line if you want to choose

between 12-hour and 24 hour mode.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Press the display key to save the entry.

Open the menu.

s ç

Select the menu item and confirm.

Alarm Clock

Select the menu item and confirm.
The current setting is displayed.

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands