Siemens Gigaset C1 User Manual Download Page 110

Page: 110 / 300

109

Individual handset settings

S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_hs.fm / 08.06.2004

Vibration alarm

Incoming calls and other messages are signalled by a vibration. This setting is independ-

ent of ringer settings.

Activating/deactivating advisory tones

Your handset uses 'advisory tones' to tell you about different activities and statuses. The

following advisory tones can be activated and deactivated individually (the default set-

ting is on).

◆

Key click:

Every key press is confirmed

◆

Acknowledge tones:

– Confirmation tone (rising tone sequence): at the end of an input/setting, when

the handset is placed in the base and when a text message or a new entry arrives

in the calls list or answering machine list (on Gigaset with integrated answering

machine)

– Error tone (a descending tone sequence): with incorrect inputs

– End of menu tone: when scrolling at the end of a menu

◆

Battery tone:

The batteries must be charged.

On the MT:

SL1

Open the menu.

s ê

Select the menu item and confirm.

Silent Alert

Select the menu item and confirm (

‰

= activated).

Long

press (back to idle status).

Open the menu.

s ê

Select the menu item and confirm.

Advisory Tones

Select the menu item and confirm.

In the

Key Tones:

line, activate or deactivate the key

click.

s r

Scroll

the

Confirm.:

line to activate or deactivate

the confirmation tones.

s r

Scroll

the

Battery:

line and choose

Off

, or

Call

. The battery warning tone is activated or deacti-

vated or only rings during a call.

[RRRRRRRRRRRRRRRRRRRRRRRRRR]

Save

Press the display key to save the setting.

Long

press (back to idle status).

Summary of Contents for Gigaset C1













































































































































































































































































































Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands

Siemens Gigaset C1, User Manual

Search results

Summary of Contents for Gigaset C1

Reviews:

Related manuals for Gigaset C1

Brands by name

Popular brands