Siemens AXIOM Iconos R200 Operator'S Manual Download Page 91

Page: 91 / 238

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 52

Examination

Fluoroscopy

Fluoroscopy operating modes

❏

Standard fluoroscopy (continuous fluoroscopy)
– In continuous fluoroscopy 30 (25)

frames per second are generated by the

television central control unit.

❏

Fluoroscopy with pulsed television scanning (Supervision option)
– In SUPERVISION only 15 (12.5)

frames per second are generated. In this

case fluoroscopy is applied at half the radiation dose with half the temporal
resolution.

❏

Primary pulsed fluoroscopy (CAREVISION option)
– In pulsed fluoroscopy, the radiation is pulsed at 15 (12.5)

or 7.5 (8.3)

or 3

(3)

pulses per second. In this way a corresponding dose saving with a

lower temporal resolution is possible.

❏

Roadmap (only with DSA option) with standard fluoroscopy, with Supervision
(optional) or pulsed fluoroscopy (optional)
– Roadmap is a special fluoroscopic mode with subtraction display

Selecting the fluoroscopy operating mode

All parameters necessary for fluoroscopy are stored in organ programs.

◆

Select a corresponding organ program on the integrated generator control
console.

Changing the selection of the fluoroscopy
operating mode

It is possible to change the selection of the operating modes in connection with
the Supervision or CAREVISION options.

The current operating mode is displayed in the operating menu of the live moni-
tor.

Use the FLUOROSPOT Compact infrared control for operation.

If your system is equipped only with standard fluoroscopy, the and Fluo-
ro- keys have no function.

Values in brackets apply to VIDEOMED DHC

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 91 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: