Siemens AXIOM Iconos R200 Operator'S Manual Download Page 220

Page: 220 / 238

Accessories

Optional Accessories

/ 54

AXD3-340.620.13.01.02

Operator Manual

◆

Be sure to set the examination unit horizontal (± 10°)!

◆

As required hook a lead-rubber apron on the front bar of the holder.

◆

Hook the second lead-rubber apron according to the position of the examiner
on the left or right bar.

Removal

◆

Unhook the lead-rubber aprons from the bars after one another and carefully
place them on the side (do not kink them).

◆

Pull the bars out from the accessory rails of the collimator.

◆

Store the accessory in a suitable place.

Radiation protection

value:

The lead equivalent of the double-layer lead-rubber apron is 0.5 mm Pb at 80 kV.

Do not exceed the maximum permissible additional weight of 70N or 7kg. This
means that at the most 2 lead-rubber aprons may be hooked onto the bar.

The lead-rubber elements of this accessory are inserted in welded plastic pock-
ets. These pockets are riveted with the rails.
The plastic pockets can be cleaned easily with mild dish-washing liquid solu-
tions.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 220 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: