Siemens AXIOM Iconos R200 Operator'S Manual Download Page 145

Page: 145 / 238

POLYDOROS SX 65/80

Integrated Control Console

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 36

Explanation of displays and controls

Selection of the controls

The controls are selected with the PC mouse on the FLUOROSPOT Compact.

Normal/inverted display of the controls

❏

Normal display
– Function deactivated

❏

Inverted display
– Function activated

Functions of the +/- controls

◆

Brief button actuation
– Value increases by one step

◆

Prolonged button actuation
– Value increases until the button is released

◆

Brief button actuation
– Value decreases by one step

◆

Prolonged button actuation
– Value decreases until the button is released

Changing the focal spot and tube load

If the maximum acceptable load of the selected X-ray tube is exceeded when
switching over

❏

from the large to the small focal spot or

❏

from 100% to 80% tube load

the generator automatically reduces the mAs setting.

Selecting the measuring field (dominant)

The selection of more than one measuring field (dominant) is possible.

◆

Actuate the button
– Function activated/deactivated

80%

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 145 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: