manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 179 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 179

Accessories

Standard Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

7 

/ 54

◆

Tighten both cap screws;

◆

Make sure that the handgrip strip is secure by pulling and pressing on it.

Removal

◆

Move the patient table to the horizontal position;

◆

Loosen both cap screws on the handgrip strip;

◆

Pull the handgrip strip out of the accessory rail.

We recommend placing the handgrip strip on the far side of the user.

Warning

The handgrip strip provides additional safety for the patient. To prevent injury to 
the patient’s hands when moving the tabletop, make sure that the patient uses 
the handgrip strip (not the cap screw) and does not hold onto the head end or 
the side edge of the patient table.

If required, an additional handgrip strip for the front accessory rail can be ordered 
via the Siemens Uptime Service (against payment).

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments