manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 105 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 105

Examination

Cassette Exposures in the Spotfilm Device (optional)

AXIOM Iconos R200

AXD3-340.620.13.01.02

21 

/ 52

Tomography (optional)

The tomographic exposures are taken as linear planigraphy with 3 different blur-
ring angles.

◆

Press this key. 
– Spotfilm device exposure technique is selected: the LED lights up

◆

Press this key. 
– The LED in the start key flashes if the conditions for tomography are not 

fulfilled.

– The possible combinations for tomographic angle/tomographic time appear 

in the display.

– The selected combination is emphasized.

Press the key again and the next possible combination becomes active.

◆

Select Bucky or semiautomatic mode. 

◆

Insert a cassette and select the cassette program.

If the LED in the start key flashes,

◆

press this key.
– The compression device moves into its park position, if present.
– The tube assembly stand moves into the 0° position.
– A source-image distance of 115 cm is set.
– The image receptor unit moves into the tomographic area.

Once the positions are reached, the flashing LED goes out.

Tomographic area

If you have positioned the image receptor unit outside the tomographic area, it is 
moved automatically when you press the start key so that tomography can be 
performed with the required tomographic sequence. In this case the tabletop is 
moved automatically synchronously to the image receptor unit so that the initial 
object centering is reset.

DR

s

8

.

0

˚

8

2 0 ˚ 0 . 6 s

4 0

1 . 2 s

˚

0

2

˚ 1 . 2

4 0 ˚ 2 . 5 s

s

8 ˚ 0 . 4 s

Start

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments