Siemens AXIOM Iconos R200 Operator'S Manual Download Page 66

Page: 66 / 238

System Operation

System Settings

/ 32

AXD3-340.620.13.01.02

Operator Manual

Moving the X-ray system longitudinally

The X-ray system consists of:

– Stand with tube assembly and primary collimator
– Image receptor unit with image intensifier and spotfilm device

System remote

control console

◆

Actuate the joystick.
– Deflect up/down: X-ray system moves headwards/footwards

Tableside control

panel

◆

Press a key.
– The X-ray system moves headwards/footwards

AXIOM

Use this operating element primarily during fluoroscopy.

The speed of the movement increases the further you deflect the joystick.

The movement takes place at constant speed.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 66 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: