manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 198 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 198

Accessories

Optional Accessories

26 

/ 54

AXD3-340.620.13.01.02

Operator Manual

Cup holder

Available only with the "Compression" option

Application

Radiographic examinations of the gastro-intestinal tract, for patients drinking con-
trast medium fluids

The following requirements apply to the cup and contents:

– Diameter: 5.5 cm to 7.0 cm
– Maximum fill quantity: 250 ccm (0.25 liter)
– Maximum fill height: 8.5 cm
– Material: Rigid plastic or similar material; no porcelain or glass.

Inserting the cup

❏

The cup holder is permanently mounted on the left side of the compression 
carriage. It can swing in and out.

◆

Fill the cup with contrast medium fluid;

◆

Insert the cup in the holder.

Removing the cup

◆

Remove the cup from the cup holder;

◆

Dispose of the contrast medium fluid and the cup according to the 
manufacturer’s instructions.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments