manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 222 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 222

Accessories

Optional Accessories

50 

/ 54

AXD3-340.620.13.01.02

Operator Manual

Engaging the brakes

◆

Release the brake handle.

Releasing the brakes

permanently

◆

Pull the brake handle.

◆

Insert the brake shoe (2) so that the brake handle remains in the 
“pulled position”.
– You can now move the carriage freely in the ceiling rail.

Engaging the brakes

◆

Pull the brake handle.

◆

Remove the brake shoe.

◆

Release the brake handle.

Cleaning and

disinfection

You can clean a slightly soiled lead glass pane with a lukewarm detergent solution 
and a soft cloth.

Heavy dirt and grime should be wiped off with a linen cloth moistened with alco-
hol and then rinsed with clear water. 

Bloodstains are best treated with cold water, contrast medium residue with 
warm water.

Use disinfectants commercially available for medical use to disinfect the radiation 
protection device. 
Then wipe it off with clear water.

Sterile cover

Both window designs can be provided with sterile covers

1

; contact your Siemens 

sales representative.

While positioning the patient position the upper body radiation protection out-
side of the system’s swivel range if you do not intend to use it.

1

optional

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments