manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 192 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 192

Accessories

Optional Accessories

20 

/ 54

AXD3-340.620.13.01.02

Operator Manual

◆

Press both tension levers (4) on the belt holder inward.

◆

Pull the belt holder backward off the accessory rail.

◆

Lift the belt holder over the patient.

◆

Roll up the compression belt halfway using the cap screw.

◆

Place the belt holder next to the tensioning roller.

◆

Press both levers (2) inward on the tensioning roller.

◆

Pull the tensioning roller from the front accessory rail.

◆

Assist the patient in stepping down from the patient table.

◆

Using the cap screw (3), roll up the belt on the tensioning roller.

Radiation protection

value:

The attenuation equivalent of the compression belt is 

≤ 

0.8 mm Al.

4

4

2

2

1

3

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments