Siemens AXIOM Iconos R200 Operator'S Manual Download Page 217

Page: 217 / 238

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 54

Changing the cone

shape

Removing

◆

Hold the cone arm with one hand.

◆

Grasp the cone with your other hand and push it out to the side from the hold-
er.

Inserting

◆

Place the cone arm with the opening upwards on a firm surface.

◆

Insert the cone laterally and press it in until it snaps into place.

Attachment

◆

Move the patient table to the horizontal position.
– The compression carriage should be in the uppermost position.

◆

Hold the compression cone so that it is horizontal.

◆

Insert the pins of the cone arm into the opening in the compression carriage
up to the stop.
– The locking lever (1) locks into place.

◆

Pull on the cone arm and check for firm seating of the cone arm.

◆

Position the patient.

◆

Move the cone into the compression position.

Removal

◆

Move the patient table to the horizontal position.

◆

Move the compression carriage one notch upward.
– The cone must no longer touch the patient.

◆

Press the locking lever (1) and hold it until the lock is released.

◆

Pull the cone arm out completely.

◆

Move the compression carriage into the upper end position.

(1)

For safety reasons, the maximum compression cannot be exceeded. The com-
pression drive is automatically shut off when it reaches the maximum compres-
sion force.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 217 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: