Siemens AXIOM Iconos R200 Operator'S Manual Download Page 47

Page: 47 / 238

System Overview

Operating and Display Elements

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 44

◆

To switch the laser line light localizer on, press the button at the front of the
collimator.

◆

To switch the laser line light localizer off, press the button again.
– The laser line light localizer can also be switched off automatically by an

internal time switch.

Crosshairs

❏

The crosshairs project the longitudinal and transverse axis of the radiation field
onto the cassette or directly onto the patient.

◆

The full field light localizer for projecting the crosshairs is switched on with the
button at the front of the collimator.

◆

To switch it off press the button again.
– The full field light localizer can also be switched off automatically by an

internal time switch.

❏

The laser line light localizer and the full field light localizer

cannot

switched independently of one another.

Locking spring

The locking spring is located on the left guide rail at the underside of the
collimator.

The locking spring locks the compensating filters, templates etc. inserted in the
accessory rails of the collimator, thus securing them against falling out.

◆

To remove the accessories, press the locking spring to the left until the com-
pensating filter, template etc. can be removed from the collimator.

Caution

Beam of laser light localizer strikes patient’s or user’s eye

Risk of visual disturbance
Eye injury

◆

Do not look into laser beam.

◆

Take care that neither you nor any other person look directly into the light
beam.

◆

Close the laser radiation exit of the Laser light localizer with the sliding cover
to protect the eyes of the patient or any other person.

Caution

Long operating time of light localizer lamp

Overheating of housing and danger of burns

◆

Take care when touching the collimator housing

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 47 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: