manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 102 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 102

Examination

Cassette Exposures in the Spotfilm Device (optional)

18 

/ 52

AXD3-340.620.13.01.02

Operator Manual

Selection of the dominants

The dominants are filed in the organ programs or they can be set on the integrat-
ed generator control console.
Multiple selection of the dominants is possible.

◆

Press one of the keys.

Left dominant

Middle dominant

Right dominant

The position of the measuring field/of the measuring field in relation to the object 
can be checked on the LIH image by means of brief fluoroscopy. A diagram with 
the position and size of the relevant measuring field is displayed briefly on the 
monitor.

Warning

Please make sure when changing the selection of the dominants that the 
correct dominant is always selected.

If a selected left or right dominant becomes invalid temporarily, e.g. due to colli-
mation, then the middle dominant is selected and displayed automatically. The 
deselected dominant is displayed crossed through.

The originally selected dominant is active and displayed again only at the 1st 
pressure point of the exposure release button (precontact) or when the collima-
tor is opened again.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments