Siemens AXIOM Iconos R200 Operator'S Manual Download Page 180

Page: 180 / 238

Accessories

Standard Accessories

/ 54

AXD3-340.620.13.01.02

Operator Manual

Handgrip

Application

The handgrip can be mounted in the front or back accessory rail for stable and
secure patient positioning

Attachment

◆

Move the patient table to the horizontal position;

◆

Holding the base of the handgrip, loosen the handgrip (1);

◆

Slide the handgrip onto the edge of the accessory rail and move it into posi-
tion;

◆

Tighten the handgrip;

◆

Check that the handgrip is secure by pulling on it.

Removal

◆

Move the patient table into the horizontal position;

◆

Loosen the handgrip;

◆

Pull the handgrip out of the accessory rail.

Warning

The handgrip provides additional safety for the patient. To prevent injury to the
patient’s hands when moving the tabletop, make sure that the patient is using
the handgrip and not the head end or the side edge of the patient table.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 180 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: