Siemens AXIOM Iconos R200 Operator'S Manual Download Page 24 | Manualshive

Page: 24 / 238

Siemens AXIOM Iconos R200 Operator'S Manual Download Page 24

System Overview

Protective Measures

16

/ 44

AXD3-340.620.13.01.02

Operator Manual

Danger zones with unit in vertical position

1

The places marked in the illustration indicate possible danger points where the
patient or operating personnel can be injured.

Warning signs

Special danger zones are marked on the unit with a warning sign.

This warning sign is a reference to a possible risk of injury by crushing for the pa-
tient and/or examiner.

This warning sign shows the position of the patient table in cardiopulmonary re-
animation (CPR) with pressure compression up to 500N (50kg).

1

Between -90° and +90°, depending on the system version

x

Danger zone

If the patient is located in the danger zone, it must always be ensured that the
operating personnel are in the room and within reach of an emergency stop.
If the operating personnel leaves the room and/or moves out of reach of an
emergency stop, then the patient has to be moved out of the danger zone.

«
...
22
23
24
25
26
...
»

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments