manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 175 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 175

AXIOM Iconos R200

AXD3-340.620.13.01.02

3 

/ 54

Accessories

Preliminary Remarks

Proper use of the product

This Operator Manual describes all the accessories provided by Siemens for the 
ICONOS R200 system.
Proper use of the accessories presupposes that the user has read and under-
stood this Operator Manual in detail.
In addition, the user must be thoroughly familiar with the Operator Manual for the 
basic system.
Finally, detailed knowledge of the applicable safety regulations for the medical 
equipment being used is indispensable. These regulations are listed in the “Safe-
ty” Register of the respective system Operator Manual.

Explanation of “proper use” consists of illustrated descriptions of attaching, us-
ing and removing the accessory component.
Important information will be emphasized and enclosed in a text box.
Situations involving the use of accessories which could endanger the patient, the 
operator or the equipment will be emphasized with a 

WARNING

.

Safety

For reasons of safety for patients, operators and the equipment, only original 
accessories manufactured and sold by Siemens or Siemens-approved accesso-
ries from another manufacturer may be used.

Siemens cannot assume any responsibility for accessories not approved by us.

Orientation

❏

In front 

of the patient table looking in the direction of the X-ray tube

❏

left

 is the head end of the patient table

❏

right

 is the foot end of the patient table

❏

frontal 

means the longitudinal side of the patient table close to the operating 

panel

❏

in back 

means the longitudinal side of the patient table away from the oper-

ating panel

When using the accessories and to simplify the description, the following direc-
tional indications shall apply in this Operator Manual with regard to the working 
position of the user:

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments