manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 49 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 49

System Overview

Operating and Display Elements

AXIOM Iconos R200

AXD3-340.620.13.01.02

41 

/ 44

Changing the bulb of the laser light localizer

As soon as the lamp brightness decreases, this symbol is shown in the collimator 
display. It recommends to change the bulb.

Although you can continue working with less brightness, we recommend to 
change the bulb as soon as possible.

To change the bulb proceed as follows:

◆

Switch the system off at the generator ON/OFF console.

◆

If necessary, turn the collimator to get better access.

➩

Refer to the description in the according system Operator Manual.

Lamp cover at the backside of the collimator

◆

Loosen the 3 screws on the lamp cover using a conventional slotted screw-
driver.

◆

Remove the lamp cover.

Heat shield

(1)

(2)

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments