manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 125 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 125

Examination

Digital Radiography

AXIOM Iconos R200

AXD3-340.620.13.01.02

41 

/ 52

Selection

◆

Press this key.

◆

Press this key.
– DR scanning is selected.
– The display shows 3 scanning programs with 2 directions each.

◆

Select an organ program for DR scanning at the integrated generator console.

Deselection

◆

Press this key or select a different exposure system.
– DR scanning is deselected.

Image transfer

◆

Send the images from the imaging system to the LEONARDO workstation us-
ing the "DICOM Send” function.

Releasing an exposure

❏

Release the exposure with the exposure release button in the system remote 
control console or via the footswitch in the control room, or table-side (option).

❏

Radiation is released as long as you continue to press the exposure release 
button.

❏

The signal lamps for radiation must light up.

Radiation interruption

If you let go of the exposure release button during radiation, the exposure is in-
terrupted immediately. 

Exposure end

Letting go of the exposure release button, a full image memory or reaching the 
maximum scene time ends the exposure series.

DR

DR

DR

DR

Warning

If these radiation ON indicators light up although no switch has been actuated 
and the current fluoroscopic image cannot be seen on the monitor:

◆

Switch the system off immediately!

◆

Notify SIEMENS Uptime Service.

◆

Discontinue operation of the system.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments