is enclosed in square brackets then append the port number. For example, to
specify the default port for ftp (port 21), the format of the address is as follows:
•
IPv4: 169.254.0.10:21
•
IPv6: [FE80::260:78FF:FE04:5943]:21
Configurable Ethernet settings
‘W’ indicates the setting can be configured (written) while ‘R’ indicates it is read-
only.
NOTE:
Some additional Ethernet settings are available in the Advanced
Ethernet menu in ION Setup and on the meter webpages.
Setting
Display
ION Setup
Webpages
IPv4 address
W
W
W
IPv4 Subnet mask
W
W
W
IPv4 Default gateway
W
W
W
IPv4 Assignment
Mode (DHCP/Stored)
W
W
W
IPv6 Assignment
Mode (DHCP/Stored)
W
W
W
Ethernet Device name
R
W
W
Domain name
R
W
W
IPv6 enabled
W
W
W
IPv6 Link Local
Address
R
R
R
IPv6 global address
R
W
W
IPv6 gateway
R
W
W
Ethernet Rx timeout
—
W
W
Modbus TCP timeout
—
W
W
Modbus gateway
—
W
—
MAC address
R
R
R
Ethernet primary DNS
R
W
W
Ethernet secondary
DNS
R
W
W
Configuring IPv4 / IPv6 communications settings using ION Setup
You can configure your device’s IPv4 and IPv6 address settings, such as stored
addresses or address assignment mode, using ION Setup.
When configuring communications parameters, ensure you maintain at least one
communication path that allows full access to your device; otherwise you may
permanently lose the ability to change your device’s configuration and access
additional data.
NOTICE
LOSS OF ACCESS
Failure to follow these instructions can result in loss of access to the
device.
Ensure you maintain sufficient access to communicate with and configure your
device.
Contact your network system administrator for your IP addresses and other
Ethernet network configuration values.
30
7EN05-0390-00
Summary of Contents for 9810 Series
Page 1: ...9810 series User manual 7EN05 0390 00 09 2018 www usa siemens com pds ...
Page 4: ......
Page 12: ......