Siemens 9810 Series, User Manual, Page: 105 / 218

Display
Menu Menu screens Content
Power Power summary,
demand, power factor • Per-phase and total kW, kVAR and kVA values,
along with minimum and maximum values.
• Delivered and received demand values
including peak demand.
• Per-phase and total power factor along with
minimum and maximum values.
Energy Energy Energy delivered-received, delivered and received.
Events Events Meter event log entries listing and details.
Power quality EN50160, harmonics,
phasors • EN50160 values.
• Voltage and current harmonics, with individual
and total harmonic values.
• Phasor diagram with magnitude and angle
values.
Inputs/outputs Digital inputs, digital
outputs, analog inputs,
analog outputs Digital and analog I/O values and counts.
Nameplate Nameplate Meter model, firmware version and serial number,
along with owner and tag information.
Custom screens
—
Custom screens
Normal Display
Mode
—
Access to the display mode selection screen.
Setup Menu
—
Access to the setup menu screens.
Setup menu
Meter configuration can be performed through the display.
Configure your meter’s security settings to allow front panel (display)
programming in order to set up the meter using the display.
NOTE: Your display may appear differently than shown, depending on your
meter’s power system, configuration and display settings.
NOTE: Some setup parameters cannot be configured when revenue security
is enabled.
7EN05-0390-00 105