Siemens 9810 Series, User Manual, Page: 3 / 218

Notices
FCC
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that the interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that any changes or modifications not expressly approved
by Siemens Industry could void the user’s authority to operate the equipment.
This digital apparatus complies with CAN ICES-3 (B) /NMB-3(B).
About this manual
This manual discusses features of the 9810 series power meter and provides
configuration instructions.
Throughout the manual, the term “meter” refers to all models of the 9810. All
differences between the models, such as a feature specific to one model, are
indicated with the appropriate model number or description.
This manual assumes you have an understanding of power metering and are
familiar with the equipment and power system in which your meter is installed.
This manual does not provide configuration information for advanced features
where an expert user would perform advanced configuration. It also does not
include instructions on how to incorporate meter data or perform meter
configuration using energy management systems or software, other than ION
Setup. ION Setup is a free configuration tool available for download from
www.usa.siemens.com/pds.
Please contact your local Siemens Industry representative to learn what additional
training opportunities are available regarding the 9810 meter.
Make sure you are using the most up-to-date version of your meter’s firmware in
order to access the latest features.
The most up-to-date documentation about your meter is available for download
from www.usa.siemens.com/pds.
Related documents
Document Number
9810 series installation sheet QGH82363
ION Reference 7EN05-0290
ION device template reference
—
7EN05-0390-00 3