Siemens 9810 Series, User Manual, Page: 109 / 218

Display
Numeric format setup
Parameter Values Description
Digit Grouping 1000.0, 1,000.0, 1 000,0 Specifies how digits are grouped for display
Volts Resolution 1., 1.X, 1.XX, 1.XXX, 1.
XXXX Specifies the number of decimal places
displayed for voltages
Current
Resolution 1., 1.X, 1.XX,1.XXX, 1.
XXXX Specifies the number of decimal places
displayed for currents
Power
Resolution 1., 1.X, 1.XX, 1.XXX, 1.
XXXX Specifies the number of decimal places
displayed for power and energy measurements
Language setup
Select the language to be shown on the display.
By default, your meter has the following languages:
• English
• Spanish
• French
• German
• Italian
• Portuguese
• Russian
• Chinese (simplified)
Creating custom displays using ION Setup
You can use ION Setup to create new custom displays.
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Navigate to Displays .
4. Select Displays from the Front Panel tab and click Edit .
ION Setup loads your meter’s display information into the Display Editor
screen.
5. Select the display mode of the custom screens from the dropdown list, and
rename, delete, or change the order of custom displays.
a. Click New to add a new display screen in the selected display mode.
b. Click Edit to bring up the Display setup screen, where you can
configure new or existing custom displays.
6. Configure your screen.
• Screen Type : Specify the number of parameters displayed on the
screen.
• Screen Title : Enter the title to be shown at the top of your custom
display.
7. Click Edit to select the displayed parameters.
The number of parameters displayed is determined in the Screen Type
selection described above.
8. Select your digit display properties.
• Resolution : Specifies the number of decimal places displayed.
• Last Digit : Specifies if the last digit is rounded or truncated.
9. Click Send to save the changes in the meter.
7EN05-0390-00 109