Siemens 9810 Series, User Manual, Page: 163 / 218

Logging
Data recorder IEEE 519 component logged
V3Hrm 17-32 (Data Rec 49) V3 voltage harmonics
V3Hrm 33-48 (Data Rec 55) V3 voltage harmonics
Related Topics
• Configuring data logging using ION Setup
Configuring data logging using ION Setup
Use ION Setup to configure the meter’s data recorders.
Changing the meter’s data recorder configuration clears existing data in that data
recorder.
NOTICE
DATA LOSS
Failure to follow these instructions can result in data loss.
Ensure that all important data has been recorded before configuring data
recording.
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Navigate to Logging > Memory .
4. In the Status tab, select the data log and click Edit .
The Log Depth Setup window appears.
5. Configure the settings as applicable:
Parameter Description
Log Interval How frequently records are logged
Log Depth Maximum number of records stored in the log
Log Memory Information only. This is automatically calculated, and displays how
much memory the log uses based on the
Log Interval and Log
Depth
Log Storage Information only. This is automatically calculated, and displays how
much total memory is left after subtracting the
Log Memory usage
Related Topics
• Default data logging configuration
Waveform recording overview
The meter’s factory-configured waveform recorders store waveform data related
to power quality events.
Waveform information is used to help identify power system disturbances, which
are an increasing concern for industrial plants, hospitals, data centers and other
facilities where the equipment is sensitive to voltage or current sags, swells,
transients, and momentary interruptions. Waveform information is also used to
help ensure compliance with power quality standards.
In addition to measuring and recording numerical values for voltage and current,
your meter can also capture the sinusoidal waveform data. The current and
7EN05-0390-00 163