Siemens 9810 Series, User Manual, Page: 137 / 218

Alarms and alerts
7. Click Start to begin transient learning.
– Learning status and time remaining are indicated in the Learning Status
box.
– Click Abort to stop transient learning.
8. Apply the learned values.
–
Automatic: the threshold is automatically applied unless there are issues
with the learning process.
–
Manual: navigate to Alarming > Transient . Select Transient/Waveshape
and click Learn . Click Install to apply the learned values.
NOTE: If you click Install while learning is in progress (in either manual or
automatic installation mode), it stops the learning process and prompts
you for confirmation that you want to stop learning and install the learned
limits. Once you have confirmed, the learned values are automatically
installed or prepared for manual installation.
Transient learning parameters
Parameter Value/Range Description
Install mode Automatic,
Manual
• Automatic: the learned values are automatically
applied.
• Manual: the learned values are stored for you to
review and enter.
Duration 1-365 Days for maximum learning duration.
7EN05-0390-00 137