Siemens 9810 Series, User Manual, Page: 104 / 218

Display
Summary
Summary
Alarms Active Alarms Active Alarms Acknowledge All Alarm Details
Historical Alarms Historical Alarms Acknowledge All Alarm Details
Basic Readings Voltage Volts L-L Volts ll Average Volts ll Min Volts ll Max
Volts L-N Volts ln Average Volts ln Min Volts ln Max
Volts Unbalanced
Current Current I Average I Min (Ia Ib Ic) I Min (I4) I Max (Ia Ib Ic) I Max (I4)
Frequency Frequency
Power Power Summary Power Total Power Total Min Power Total Max
Power Phase A
Power Phase B
Power Phase C
Demand Total Demand Delivered Peak Demand Delivered Total
TOU Peak Demand
Delivered (A-B) TOU Peak Demand
Delivered (C-D)
Total Demand Received Peak Demand Received Total
TOU Peak Demand
Received (A-B) TOU Peak Demand
Received (C-D)
Power Factor Power Factor Power Factor Total Min Power Factor Total Max
Energy Energy Delivered-Received
Energy Delivered TOU Energy Delivered A&B
TOU Energy Delivered
C&D
Energy Received
Events Events Event Details
Power Quality EN50160 EN50160 Power Frequency Power Frequency Compliance
EN50160 Nominal Supply Voltage
EN50160 Supply Voltage - V1 Voltage Compliance - V1
EN50160 Supply Voltage - V2 Voltage Compliance - V2
EN50160 Supply Voltage - V3 Voltage Compliance - V3
EN50160 Volts Unbalance Volts Unbalance Compliance
EN50160 Volts Harmonics - V1 Volts Harmonics Compliance - V1
EN50160 Volts Harmonics - V2 Volts Harmonics Compliance - V2
EN50160 Volts Harmonics - V3 Volts Harmonics Compliance - V3
EN50160 Voltage Flicker - V1 Volts Flicker Compliance - V1
EN50160 Voltage Flicker - V2 Volts Flicker Compliance - V2
EN50160 Voltage Flicker - V3 Volts Flicker Compliance - V3
Harmonics Voltage THD V1 Harmonics V2 Harmonics V3 Harmonics
Current THD I1 Harmonics I2 Harmonics I3 Harmonics I4 Harmonics
Phasors Phasor Diagram
Inputs/Outputs Digital Inputs Digital Inputs
Digital Outputs Digital Outputs
Analog Inputs Analog Inputs
Analog Outputs Analog Outputs
Nameplate Nameplate Nameplate
Custom Screens
See Creating custom display
screens section for details.
Normal Display
Mode
Normal Mode Screens
Alt Display Mode
Test Mode
Setup Menu
Setup Menu
See Setup menu section for
details.
Alt mode data display screens
Your meter’s alt mode display screens show measured and calculated information
about the power system being monitored.
NOTE: Minimum, maximum (peak), average and time of use (TOU) values are
typically accessed by pressing More to open a list of additional screens.
Menu Menu screens Content
Summary Summary Power system summary
Alarms Active alarms,
historical alarms Active and historical alarms can be viewed and
acknowledged.
Basic readings Voltage, current,
frequency • Power system voltage (line-to-line or line-to-
neutral), current and frequency values.
• Average, minimum and maximum values are
also provided.
104 7EN05-0390-00