Siemens Mobility Limited
Sopers Lane, Poole, Dorset
BH17 7ER
Version
11
Page 58 of 117
Status
Issued
Last Editor
Jeerh, Manpreet
Date
March 2020
Document
Name
WIMAG GENERAL HANDBOOK
Doc. No.
667/HB/47200/000
Copyright
©
Siemens Mobility Limited 2012. All Rights Reserved.
Figure 43 : Configuration Download
– Command Tab
To upload and recover the access point to pre-configured settings, the following actions
should be performed;
1.
Connect to the access point using the ‘Traffic Dot Application’
2. Select the access point on the map (or in the table) which should bring up the
‘
Config Window’
.
3.
Select the ‘
System Config
’
tab.
4. Then select the
‘Command’
sub-tab.
5.
Use the ‘
Restore
’ option to upload the configuration file.
6.
Select the ‘
AP Config’
tab
7.
Then select the ‘
Commands
’ sub-tab.
8.
Select ‘Reboot’ to reboot the access point. The access point will then recover with
the pre-defined configuration.
