Siemens Mobility Limited
Sopers Lane, Poole, Dorset
BH17 7ER
Version
11
Page 34 of 117
Status
Issued
Last Editor
Jeerh, Manpreet
Date
March 2020
Document
Name
WIMAG GENERAL HANDBOOK
Doc. No.
667/HB/47200/000
Copyright
©
Siemens Mobility Limited 2012. All Rights Reserved.
5.1 Front Panel Description
The Loop Detector Replacement Card has a number of status Indicator LEDs and a
single push button. This section describes each of these functions.
Figure 23 : Loop Detector Replacement Card Front Panel
The ‘push button’ on the front panel which provides the following functionality;
•
Tap once to enable/toggle the LEDs (see below),
•
hold for 5 seconds to perform an board reset.
Note : During a board reset, all of the front panel LEDs will illuminate briefly to indicate
that a reset has been performed.
